The forced feeding wood crusher is based on the wood crusher and uses the principle of magnetic roller extrusion cutting and hammer cutting friction on the main shaft to crush the materials. Compared with the original wood crusher, the advantage of the automatic feeding wood crusher is time-saving and labor-saving. It can speed up the crushing of materials and use high-strength magnetic roller extrusion cutting, Therefore, this equipment is also known as forced feeding wood crusher. It has fast feeding and discharging speed and is not easy to block the screen.

　　1. Automatic feeding saves time and labor. The materials are fed by the feeding conveyor, and the frequency converter is added to adjust the feeding speed, which can crush the larger or smaller materials without putting the wood one by one, which improves the production efficiency and the output is higher and higher;

　　2. Magnetic roller operation and spindle hammer rotation operation. After the operation of high-strength magnetic roller, the hammer is used for striking and cutting, and then filtered out by the screen. The whole process is simple and clear, which realizes the first crushing and then crushing of materials, and there is no fear that large materials will damage vulnerable parts;

　　3. The inner shell of the main engine is equipped with wear-resistant lining plate, which is firm and solid. This is conducive to the mutual friction and crushing of materials, and greatly improves the qualified rate of finished products. (the discharge size of finished materials can be adjusted according to the screen size)

　　4. Using the principle of magnetic roller extrusion, the materials are broken and cut, and then enter the main machine crushing chamber, cut and crushed by the hammer on the main shaft, and then filtered out by the screen. These finished materials are extracted by the fan, and the materials finally flow out of the dust removal cloth bag. The working principle is simple and the operation is easy, which avoids the problem of difficult feeding.

　　The forced feed wood crusher integrates the functions of blade cutting,high-speed air impact and collision, and can complete the micro material sorting process at the same time. In the process of blade cutting and crushing, therotor generates high-speed air flow, rotates with the cutting direction of the blade, and the materials accelerate in the air flow and impact repeatedly, so that the materials are subject to double crushing at the same time, accelerating the crushing rate of the materials.