Wood crusher can break branches, leaves, and can crush scraps, small wood blocks, equipment for a long time use, there will be failures, what are the failures? How to solve it? With the extension of use time, the following faults often occur:
One, broken when the weak work;
Two, do not start, do not power;
Third, the output declined significantly.
Under normal circumstances, it can be repaired by itself. First check the power socket, plug, power cord whether there is oxygen off, broken, if not can plug in the power test machine. In the normal production process, if the output of the equipment is significantly decreased, it is necessary to shut down the equipment to open the upper cover, check whether the screen is loose, if not, should check whether the hammer is badly worn, if it is significantly worn. If the distance between the hammer and the screen exceeds 10mm, the hammer should be replaced in reverse and reused. After two replacement of the hammer, if a similar situation occurs again, the new hammer should be replaced.
