The sharpening machine is used to trim a variety of high-speed steel metal cutting and trimming cemented carbide tool equipment, the sharpening tool is simple and convenient, and the blade is ground in a straight line, compared with manual sharpening, the use of the blade strength increases, increasing the service life of the blade; Generally for woodworking shavings machine, wood chipper, wood chip shredder, wood shredder, mushroom shredder and other wood machinery and equipment cutter inside the blade grinding edge; The machine has the advantages of small size, fast effect and stable operation, and is suitable for the machining of various straight edge tools. The following is a summary of the precautions for the use of wood chipper by Enhong Machinery for your reference.
1, the electrical equipment of the motor is suitable for use in the ambient temperature range of 0-40 degrees, and the average temperature within 24 hours shall not exceed 35 degrees, when the body temperature exceeds 40 degrees, the relative temperature does not exceed 50%, and the altitude is below 2000 meters.
2, before the test preparation: the wood chipper is required to carefully check whether the cable is in good condition and whether each electrical component is in good condition before it is allowed to turn on the power.
3, operation instructions: First turn on the power switch, then you can test; Press the start switch of grinding wheel to start the grinding wheel motor, press the stop button of grinding wheel to stop the grinding wheel motor.
4, if there is a problem in the work, press the emergency stop button, the machine will stop working.
