Wood crusher as the name suggests is used to break wood mechanical equipment, but it is not completely only broken wood, according to the model, its output will be different, of course, the economic benefits of the enterprise will also have a different impact, so what factors will affect the output of wood crusher?
One is the choice of materials, the wood crusher has many functions, a wide range of application, countless types of raw materials that can be broken, then different raw materials their growth structure, material density and so on are different, like straw, weeds and so on are more easily broken, then mahogany, pine and so on are not easy to break, Therefore, the choice of materials is the most important factor for the output of wood crusher.
The second is the moisture content of raw materials. This is a problem that I believe everyone will not be unfamiliar with, and dead branches are also more fragile than newly cut branches, which is caused by different water content. In addition, the moisture content is too high, not only the yield is low, but also if the material particle requirements are too small, it is easy to block the screen, the general wood material moisture content is less than 17%, under normal circumstances, if the value is not too high, it can also be crushed, but once the normal proportion is too much, It will affect the output of the wood crusher, so we need to dry the material with too high water content and then crush it, which is easy to handle.
The third is particle size. This situation is not difficult to understand, the output of the wood chipper is certainly higher than the output of the wood crusher, the finer the powder, the lower the output will be, the wood that does not meet the requirements will continue to be crushed in the machine bin, until the powder is crushed into the material that meets the requirements, there will be sieve leakage phenomenon. Therefore, the particle size of the product also has a great influence on the yield.
Fourth, the problem of power. Taking into account the power problem, because different models are generally equipped with the right motor, the blind power can not completely optimize the output of the equipment, and may also damage the wood crusher, so we in the purchase of wood crusher, consult a manufacturer whether you can match the required power, this is the key.
