The chipper can cut logs, branches, veneers, waste veneers, bamboo, cotton and other non wood fiber stems into flakes of certain specifications as the basic raw materials for at least particleboard, fiberboard, non wood-based board and pulping and papermaking. The machine has advanced structure, high quality of cutting flakes, wide adaptability of raw materials and convenient operation and maintenance. The machine consists of machine base, knife roller, upper and lower feeding rollers It is composed of conveyor belt, hydraulic system, etc.
The base is welded with high cavity steel plate, which is the supporting foundation of the whole machine; Two flying knives are installed on the knife roller, and the flying knife is fixed on the knife roller through the pressure block with specially manufactured flying knife bolts; According to the different thickness of the raw material to be cut, the upper feeding roller assembly can float up and down within a certain range with the help of the hydraulic system; The cut qualified sheet material falls through the screen hole and has a bottom row. The large sheet material will be cut in the machine.
Hydraulic system: the manual oil pump supplies oil to the oil cylinder, which can start the cover to facilitate the replacement of the blade. During maintenance, the upper feeding roller assembly can be lifted to facilitate the adjustment of the clearance between the flying knife and the bottom knife and the disassembly and assembly of the comb plate.
